RE-NEW Vinyl / Carpet Dye

1. Clean surface first with detergent and water. Rinse clean and let dry. Mask areas not to be coated
2. Shake can vigorously for 1 minute after mixing ball rattles to ensure color uniformity.
3. Test spray on an inconspicuous area or scrap piece for compatibility and color match.
4. Press spray nozzle firmly. Apply light mist coats 6”-12” from surface. Use steady and even strokes while spraying.
5. Allow 5 minutes between coats when needed.
6. After each use, turn can upside down and spray several seconds to clear spray head.

SPECIAL NOTES: Product dries to touch in 10 minutes at room temperature. Some vinyl and plastics take up to 48 hours for permanent curing. CARPETS: Be sure carpet is dry.

TECH TIP: Apply light coats, brushing in between coats with a stiff nylon brush to keep fibers separated while drying. Repeat process until color is even. Make sure carpet is dry to the touch before applying additional coats.  On carpets, spray, let dry and brush lightly with a stiff brush to restore softness and texture.

Note: Not all colors are available with our new label as pictured.

Order by these numbers:

(Sold 12 per case)