F-Bomb™ Foam Cannon

F-Bomb™ Foam Cannon creates thick, long-lasting rich foam that clings better to vertical surfaces for maximum dwell-time and maximum cleaning power.  The 32 oz. solution tank holds plenty of soap solution to cover even the largest vehicles with a thick layer of creamy foam. Wide mouth opening makes it easy to add and mix your soap and water solution.  The high-pressure sprayer help breaks down dirt and grime faster, saving time and money!

Pressure Washer Requirements:

• Min Pressure Rating: 1,000 PSI
• Max Pressure Rating: 5,300 PSI
• Max Flow Rating: 5.3GPM
• 1.25 Orifice

What’s included:

• Foam gun w/ brass fittings
• 32 oz wide-mouth bottle
• ¼” Quick connect fitting
• Flexible dip tube with filter

Features:

• 1/4″ quick connect fitting for easy attachment to pressure washer wand
• Nozzle can be rotated to control spray fan angle
• 32oz. wide mouth solution tank is made of durable high-impact plastic

Use for:

• This high-quality cannon is an excellent match with Distinctive Details F-BOMB™ Foam Cannon Soap.

• Visit distinctivedetailsinc.com to read and understand all info on label first.
• Not recommended to be used in direct sunlight
• Because our car soaps are highly concentrated, following our dilution recommendations will allow for easy rinsing and no streaking.  Do not let soap dry on surface.

To ensure safe power washing, always wear proper personal protective equipment (PPE), including safety glasses, gloves, and closed-toe shoes, and avoid spraying yourself, others, or animals.

1. Use with a pressure washer (not included) with a minimum of 1.5 GPM flow and a minimum 1500 PSI for proper operation.
2. Add 2 oz of F-Bomb™ to the 32 oz. solution tank or foam cannon and fill the remaining 30 oz with water.
3. Spray the entire vehicle down with F-Bomb and let sit for 1 – 3 minutes to allow the foam to encapsulate any dirt & grime to have it slide down the surface.  Never let the soap dry on the car.  For tough stains and grime, agitate the surface with a brush or wash mitt as needed. Rinse thoroughly with water.
4. Towel, chamois or blow dry.
5. Thoroughly clean and dry foam cannon before storage.

Manufacturers liability is limited to replacement of this product or refund of purchase price.

Order using this part number:

Part# 95007