D-PREP

D-PREP is a ready-to-use paint and wheel decontamination cleaner that effectively removes metallic fallout particles embedded in painted surfaces.  D-PREP breaks the bond between embedded metallic particles and the painted surface.  Ideal for use as a fall-out remover and before claying to enhance and smooth the surface.

Features:

• This product contains Redtec™ which changes product color to a bright red/violet when cleaning certain brake dust or metallic particles
• Lemon fragrance with a sulphur odor is present from the raw materials used in this product
• Fast acting

Benefits:

• No mixing
• Lifts ferrous metallic particles without buffing
• Quickly preps vehicle for cleaning

Use for:

• As a prewash to remove rail dust and metallic particles from painted surfaces
• Prepares surfaces for easy claying
• Fall -out remover and surface de-contaminant

• Consult SDS for complete safety information before using.  Do not use in direct sunlight. Do not let product dry on glass, plastic, or painted surfaces. Test in an inconspicuous area before use. NOTE: D-Prep may stain some concrete surfaces if they are not wet down first, and immediately, after cleaning.

Wheel Cleaner

1. Wet surface, surrounding area, and concrete with water before cleaning.
2. Spray on surface to be cleaned and allow dwell time (2 to 4 minutes).
3. Baked on brake dust may require agitation.
4. Rinse thoroughly with a hard stream of water.

Painted Surfaces

1. Use on a cool surface and out of direct sunlight.
2. Rinse automobile thoroughly to remove loose surface dirt
3. Spray D-Prep onto painted surface and allow 2 minutes to change color allowing any ferrous oxide present to dissolve.
4. Gently agitate if necessary.
5. Rinse surface with cool water.

NOT FOR SALE IN CALIFORNIA- FOR PROFESSIONAL USE ONLY-MADE IN USA

Order using these numbers:

40513 –  Quart (32 oz.) Carton Qty: 12
40514 –  1 Gallon Jug   Carton Qty: 4
4051S –  5 Gallon Square
40517 –  55 Gallon Drum